Swimming pools, blue haven pools for some are great additions to your home, especially if you like swimming or if you wish, as a form of exercise. A swimming pool at home can also be an ideal area for a family getaway, as well as parties and meetings. In fact, it can be a romantic place for you and your partner. However, along with the luxury of having a pool right in your backyard is the responsibility of ensuring that the pool is well maintained and clean at all times.
Determine the water hardness to measure the hardness of water; a water test kit may be employed. If water hardness is more than the desired level of sodium hexametaphosphate can be applied to lower it. In the case of water hardness is less, dehydrating the calcium carbonate is ideal to raise it. Chemicals should be poured carefully in various parts of the blue haven pools and not concentrated in one particular area. Before applying these chemicals to pool water, look through the instructions of the water test kit.
Determine the alkalinity of the water
It is advisable to check the alkalinity of the water from time to time. The ideal figure should be between ranges of 80 to 150 ppm. It is best if the alkalinity between 100 and 120 ppm. In the case of alkalinity is less than or greater than the desired level, the chemicals can be used to adjust. Application of sodium bisulfite alkaline level decreases, while the baking soda is used to raise it.
Maintain the pH level
Maintain the pH level of the pools is a key to end the proliferation of bacteria in them. A pH meter can be used to measure the pH level of pool water. The ideal pH level is between 7.2 and 7.6. In case, the pH level is below the standard measure of sodium carbonate must be added to water. Liquid muriatic acid is apt to lower the pH level of the water.
The use of chlorine to clean the pool water
Chlorine works well to keep the water clean the blue haven pools. For intensive use pools, chlorine should be added three times or four times a week. If the growth of bacteria in a pool, superchlorination be solution can be added to it. This solution is much stronger than chlorine kills bacteria effectively normal. For best results, add chlorine to the pool water after sunset.
Dispose of waste before entering the pool
Make sure the pool is free of debris every time you use it. Visible remains can be removed by using a network. You can also use the covers to remove the remains of adjustment in the pools. However, the blue haven pools clean and ready for use again.